Tri-Flo 325 Square Foot 110 Volt 15 Amp Bed Bug Heat Treatment Kit

Tri-Flo 325 Square Foot 110 Volt 15 Amp Bed Bug Heat Treatment Kit
Tri-Flo 325 Square Foot 110 Volt 15 Amp Bed Bug Heat Treatment Kit


Tri-Flo 325 Square Foot 110 Volt 15 Amp Bed Bug Heat Treatment Kit

  • Yes, It's in stock
  • FREE & Discreet Shipping!

Quickly treat an entire room with a Tri-Flo bed bug heat treatment kit! This is a safe, effective, reliable treatment method for hotel rooms, bedrooms, and more. The ETL-certified heaters are easy to set up, safe to use, and work with existing electrical equipment.

Our Price:

Key Features:
  • Kills 100% of bed bugs in the room
  • Effective against bed bug eggs and nymphs
  • Easy to set up and use
  • Safe and effective non-chemical treatment
  • Single plug per heater
  • ETL certified, UL-recognized parts
  • 19,120 total package BTUs
  • Limited one-year warranty
  • Bonus: includes Master Heat Technician training ($499 value),
           online product registration required

Bed Bug Supply Review - see what our experts have to say about this product

The Tri-Flo 15-amp heat treatment system is the first complete room treatment solution that can be run on standard, grounded 15-amp outlets. They're all-electric and ETL-certified to ensure safe operation, and they're a lot simpler to transport and operate than the traditional propane and diesel-powered rigs normally used by professionals.

Heat treatments with electric heaters are significantly safer than other gas-powered heat treatment methods. Those may use more powerful heaters, but they carry a real risk to excessive carbon monoxide exposure, in addition to a risk of accidental fires. Tri-Flo's heaters are all-electric and ETL-certified to ensure safe operation.

Tri-Flo's packages are much simpler from the start than the heating gear that pest pros are used to. Electric heat setups usually require at least a 3-phase, 20kW diesel generator. Those weigh almost 800 pounds and need to be towed to the job site. The 8-piece Tri-Flo kit is much simpler and more cost-effective in comparison. The kits include durable, stamped metal-body heater units and powerful circulation fan.

Bed bug heat treatments have been as effective for many users as they are risk- and cost-prohibitive for others. With the prospect of hauling around hundreds of pounds of gear and dealing with diesel or kerosene, in addition to the added noise and chemical exposure, most professionals have resigned to using slower alternative treatment methods that require multiple follow-ups.

The Tri-Flo packages are here to change that. These are simple, effective, and safe alternatives to the gas motor heaters in the field today. One plug per heater, and you're in business; no generators, no fuel, and no extra power equipment. For the first time, hotel managers, property managers, and pest control operators have access to a truly safe and cost-effective heat treatment package.

Product Information

Heat treatments are a safe and effective alternative to spraying your belongings with chemicals. A bed bug heater can treat a space quickly and thoroughly by safely heating insulated items to a lethal temperature. This saves time spent checking each and every item, and saves money that may otherwise be spent replacing infested items that are thrown out.

The Tri-Flo 15-Amp kit is a new, safer and simpler design for heat treatments. It's portable, durable, ETL-certified, and made in the USA. Included is everything you need to effectively treat a hotel room or bedroom of up to 325 square feet with just one standard 110-volt, 15-amp plug per heater unit and another circuit for the circulation fan. This is especially attractive to hotel managers and owners, since rooms can be treated more quickly and put back in service sooner.

What's Included:

  • 4 x Eradi-Flo 1,400-watt heaters (110v, 15a circuit required for each)
  • 2 x Circulation fans (additional 110v, 15a circuit required)
  • 1 x Laser infrared thermometer
  • Master Heat Technician training & certification
           (online product registration required)

Ideal for rooms up to 325 square feet.

Required power outlet access:

  • 5 x 110-120 Volt, 15 Amp
Tri-Flo 325 110 Starter contents

Choosing a Tri-Flo Package:

  • Price
  • Treatment Area
  • 220V Outlets
  • 110V Outlets
  • Total Heat Output

Tri-Flo 325 220 Starter

  • $1,899
  • 325 square feet
  • 1
  • 1
  • 17,100 BTUs

Learn More

Tri-Flo 325 110 Starter

  • $2,499
  • 325 square feet
  • -
  • 4
  • 18,450 BTUs

Learn More

Tri-Flo 325 15-Amp Starter

  • $2,899
  • 325 square feet
  • -
  • 5
  • 19,120 BTUs

Learn More

Tri-Flo 500 Combo

  • $2,999
  • 500 square feet
  • 1
  • 3
  • 29,400 BTUs

Learn More

Power Outlet Requirements:

Determine the number and type(s) of power sources available to the area. At a minimum, you will need access to five 110/120-volt, 15-amp circuits with grounded outlets. Other kits are available with heaters for 20-amp and 30-amp circuits if those are present.

For rooms over 325 square feet, you will ideally have access to both 110-volt and 220-volt circuits. Use extension cords to reach circuits adjacent to the room itself, if needed.

There are three packages available, designed for rooms up to 325 square feet. The 110 Starter includes three 110-volt, 1800 watt heaters, and the 15-Amp Starter includes four 15-amp, 1400 watt heaters, while the 220 Starter includes a single 220-volt, 5000 watt heater. The 220 Starter is easier to use and more affordable, but requires access to a more powerful circuit. If that is not possible, the 110 Starter or 15-Amp Starter are suitable alternatives.

The Tri-Flo 500 Combo package combines a 5000-watt heater with two 1800-watt heaters. This is a much more potent solution intended for larger spaces, and will require access to both 110-volt and 220-volt power sources on independent circuits.

Using the Tri-Flo Bed Bug Heat Treatment Kit:

  1. Pre-heat the room by setting the thermostat to the highest setting available, ideally 90 degrees or more.
  2. Place your Eradi-Flo heaters around the bed and other key treatment areas so that they heat up first. Note: Keep heaters away from curtains, bed skirts, and other fabric or flammable material.
  3. Turn the Eradi-Flo heaters on the high setting and monitor location temperatures until the room reaches a temperature of roughly 106 degrees.
  4. Once the room temperature has reached approximately 106 degrees, place the included fan in the room to provide heat circulation. Point the fan at the most heavily infested areas and turn it on the high setting.
  5. Monitor location temperatures until the room has maintained a temperature of around 135 degrees for 2 to 4 hours, depending on the level of infestation. This temperature will be uncomfortable to stay present in, so check in every 30 minutes or so with the included laser thermometer.

After you've successfully performed a heat treatment, we recommend following up with a residual spray such as CrossFire and apply bed bug mattress covers and ClimbUp insect interceptors to each bed for long-term protection.

Customers Who Bought This Item Also Bought

Customer Reviews

Write a Review View All Reviews
5/ 5stars
Life Saver
I own a motel and unfortunately keep getting rooms infested with bed bugs. Until we found this, we were paying 600 per room to treat, which would also require several days of not being able to occupy the room. With this we can treat the room in a few hours and know for sure that everything inside is dead. This paid for itself in just a couple months and we now have a fast treatment that works! I was hesitant to buy another motel due to bed bugs, but with this I can now move forward.
Reviewed by:  from Atlanta, GA.